Myco CURB® and Kemin are names recognized worldwide as the pioneer in feed preservation. Myco CURB, an organic acid combination for feed, helps preserve nutrient value and quality of feed by reducing mold contamination. Buffered for worker safety and to help prevent metal corrosion, Myco CURB is available in liquid and dry formulations.
Kemin is recognized in the feed industry for pioneering nutrient preservation of feed using blended organic acids for controlling mold growth. Over the years, Kemin tested, evaluated and perfected various combinations before arriving at the formulation for Myco CURB. Since launching Myco CURB, this non-corrosive mold inhibitor has changed how feed and feed ingredients are handled. By controlling spoilage organisms, Myco CURB gives producers of meat, milk and eggs a powerful management tool to increase production by wasting less feed and maintaining quality in their operations.
Myco CURB is a mold inhibitor for livestock feed, formulated to inhibit mold growth in processed feed ingredients, complete feed and total mixed rations (TMR). Myco CURB contains propionic acid blended with sorbic and benzoic acids and is buffered for improved equipment and employee safety.
Myco CURB is the industry leader in feed preservation because of its unique blend of ingredients. Kemin scientists developed this proprietary blend of organic acids and antioxidants to control mold growth in feed and feed ingredients. Over the years, producers and feed manufacturers have relied on the efficacy of Myco CURB Liquid to control mold growth in stored grain, increase the shelf-life of bagged feed and protect animal and poultry production by controlling performance-robbing microorganisms. Applied using Kemin-engineered application systems, Myco CURB Liquid coats the feed and feed ingredients to deliver reliable protection against a range of mold species.
Myco CURB Dry was developed for feed manufacturers and livestock and poultry producers who choose not to handle liquid products. The technology used by Kemin to manufacture Myco CURB Dry results in a free-flowing, granular product with excellent mold control efficacy. Myco CURB Dry is applied in base mixes and premixes, through micro bins, or as a hand-added ingredient. The granulation process reduces dust, thus, reducing worker exposure to fine particles.
When choosing a mold inhibitor, it is important to know that each individual organic acid will have a different effect in controlling molds. The data in Figure 1 indicates a mold inhibitor combination, involving more than one organic acid, is best suited within a feed mill.
Figure 1. Effect of various organic acids on mold growth
Another consideration when evaluating a mold inhibitor is the surfactant. Surfactants are used to lower the surface tension of liquids. When used in acid blends, surfactants help acids penetrate grain surfaces. Flaking operations use surfactant technology in grain preservation to enhance steam penetration.
Kemin sells Myco CURB in both liquid and dry formulations.
In Figure 2, a study comparing Myco CURB Dry mold inhibitor and calcium propionate in a finisher feed showed the ability to control microbial spoilage did not change with an increased application rate of calcium propionate. Whereas, increasing the application rate of Myco CURB Dry from 2 lbs/ton to 5 lbs/ton further improved its efficacy and significantly reduced mold growth in the finisher feed during the nine days of monitoring.
Figure 2. Efficacy of treatment on CO2 production in a finisher feed
Mold inhibitors benefit the feed industry by increasing the relative microbial stability of feed and feed ingredients. In general, the active ingredients of these compounds are based on short-chain organic acids that are normally considered quite corrosive. The buffered acids in Myco CURB Dry and Myco CURB Liquid help protect equipment and employees.
An experiment was conducted to test the relative corrosiveness of three mold inhibitors on galvanized, low carbon steel. This material was selected because it is one of the most common construction materials in the feed industry.
AOriginal galvanized strip
B100 percent water
C80 percent propionic acid and 20 percent water
D80 percent Myco CURB Liquid and 20 percent water
E80 percent Mold Inhibitor A and 20 percent water
Figure 3. Results of 10 days of partial immersion of galvanized test strips in liquid mold inhibitors
As shown above, this experiment demonstrates Myco CURB is the least corrosive among the three liquid mold inhibitors tested.
Kemin pioneered the use of blended organic acids in the feed industry. For the past four decades, Kemin product development optimized the formulation of Myco CURB and the resulting formulation is still the industry standard for mold and wild yeast control. Research over this period of time has demonstrated that Myco CURB works to safely control microorganisms while enhancing the bottom line of feed manufacturers.
1Pelhate, J. 1973. Ann. Technol. Agric. 22:647-661.