Ultra CURB® Liquid and Dry mold inhibitors are both highly-concentrated blends of four powerful organic acids. The combination of acids is designed to target wild yeast growth, in addition to mold growth, to reduce total mixed ration (TMR) heating. Ultra CURB may be used on processed feed ingredients and all complete animal feeds.
The use of mold inhibitors in the livestock feed industry is a management tool used by producers to maintain feed quality. Hot, humid conditions promote wild yeast and mold growth in livestock feed. Kemin is recognized in the feed industry for pioneering the use of blended organic acids to control mold and wild yeast growth in feed.
Ultra CURB Liquid and Dry mold inhibitors are highly-concentrated, synergistic blends of multiple organic acids designed to target wild yeast and mold growth to maintain TMR quality. Ultra CURB may be used on processed feed ingredients, complete animal feeds and added directly to the TMR.
Research has determined which organisms lead to TMR heating.1 Wild yeast species, such as Candida, Hansenula, Pichia, Issatchenkia and Saccharomyces, and mold species, such as Aspergillus, Fusarium and Penicillium, all conspire to reduce forage quality and cause TMR heating.
Mold inhibitors are frequently used in the feed and livestock industry. Many producers use only propionic acid with limited control against the key spoilage organisms. The combination of organic acids in Ultra CURB provide producers with control of most major spoilage organisms found in livestock feed.
Ultra CURB is a highly-concentrated blend of organic acids. Ultra CURB Liquid contains 82 percent total acid content and Ultra CURB Dry contains 42 percent propionic acid. Both feature a high inclusion level of propionic acid, as well as acetic, benzoic and sorbic acids. This combination of acids effectively targets wild yeast and mold growth in feed and feed forages to help stabilize TMR and reduce heating. This leads to a higher quality TMR.
A study was conducted to help determine the efficacy of buffered propionic acid and a buffered, multiple organic acid mold inhibitor in controlling the growth of various mold species.2 This study compared a 75 percent buffered propionic acid to Ultra CURB Liquid, which is 82 percent total organic acids, for their abilities to control mold growth. In this study, strains of three common mold species were exposed to 2, 4 or 6 pounds per ton of each mold inhibitor. The results of this study (Figure 1) show that an application rate of 2 lbs/ton of propionic acid demonstrated the least amount of mold inhibition. Meanwhile, 2 lbs/ton of Ultra CURB resulted in similar levels of mold inhibition as 4 lbs/ton of propionic acid. When multiple organic acids are used in combination with each other, a greater degree of mold growth inhibition can be achieved.
Figure 1. Control of mold growth with various levels of propionic acid and Ultra CURB
Kemin has found the initial heating of livestock feeds is actually due to wild yeast.3 As wild yeast grows, moisture and heat are produced through cellular respiration. Because wild yeast consume lactic acid as their energy source, this loss of acid generates a more optimal environment for mold growth.
Propionic acid is the most commonly used organic acid in mold inhibitors; however, acetic and sorbic acids, not propionic acid, are effective inhibitors of wild yeast growth.3,4
One study reviewed the efficacy of Myco CURB® mold inhibitor and Ultra CURB mold inhibitors in inhibiting wild yeast growth.4
Ultra CURB applied at 2 lbs/ton demonstrated rapid wild yeast growth for the first 8 hours, then little growth from 8-12 hours. When applied at 4 lbs/ton, no wild yeast growth was observed (Figure 2).
Figure 2. The impact of two mold inhibitors on Candida spp. yeast growth in the microtiter assay
These blends are buffered for improved equipment and employee safety. Ultra CURB extends shelf-life of complete feeds that contain a relatively high percentage of moisture. By preventing the proliferation of wild yeast growth, environmental conditions ideal for mold growth are delayed. Additionally, it delays the heating of TMR caused by wild yeast and mold growth.
In 2016, Kemin introduced Ultra CURB Dry. Feed manufacturers, dairy producers and beef operations have relied on Ultra CURB Liquid for many years—Ultra CURB Dry puts the power of a liquid into a convenient dry form.
The ingredients in Ultra CURB Dry have been carefully selected to provide broad spectrum control of the spoilage organisms most often found in TMR. TMR heating is caused by the growth of mold and wild yeast. The four-acid blend and scientifically-verified acid ratio found in Ultra CURB Dry means better control of TMR heating.
1Limin Kung, Jr. Proceedings, 2010 California Alfalfa & Forage Symposium and Corn/Cereal Silage Conference. Visalia, CA. 1-2 December, 2010.
2Kemin Internal Document, 03-00810.
3Pelhate, J. 1973. Stabilisation de la mycoflore de maïs-grains humides ensiles. Ann. Tech. Agric. 22:647-661.
4Higgins, C., and F. Brinkhaus. 1999. Efficacy of several organic acids against molds. J. Appl. Poultry Res. 8:480-487.
If you have a question about our products or services, or just want more information, fill out the form below and someone on our team will be in contact with you.