MillSAVOR™ Liquid and MillSAVOR™ Liquid Concentrate are two milling efficiency products designed to improve the manufacturing of pelleted feed and feed ingredients. These innovative formulations include powerful surfactants which reduce surface tension in feed particles allowing for better moisture penetration and lower energy demand for pelleting. When applied with a customized Kemin liquid system, the MillSAVOR product line delivers unsurpassed performance improvements.
MillSAVOR™ Liquid is formulated to both improve feed mill efficiency but also contains ingredients to increase pellet durability as measured by a pellet durability index (PDI). Included in finished feed at a rate of 2 pounds (1 kg) per ton of feed, MillSAVOR Liquid enhances pelleting binding and helps to reduce motor load. In a trial conducted in a Texas feed mill making cattle feed, motor load was reduced by 7%. At the same time, the tons per hour increased by over 13% (from 17.8 to 20.6 tons per hour). PDI was already very good at 94%, but the addition of MillSAVOR Liquid increased PDI to 94.5%.
MillSAVOR™ Liquid Concentrate is formulated to improve feed milling efficiency. When added at a rate of 2 fluid ounce per ton of feed (65 mL/metric ton), motor load and thru-put are improved. This low volume inclusion product is not designed to help with PDI. However, in research conducted with a large poultry producer, the increased steam penetration improved PDI by 3% (from 70% to 73%). In this same trial, tons per hour increased from 56 to 60 (+7%) with no increase in power consumption.
Depending on your milling needs, Kemin has a product to help. Our 2 pound per ton (1 kg/MT) inclusion product, MillSAVOR Liquid, is used to both increase pellet durability index (PDI) and increase mill thru put. If your milling needs only included improved thru-put or reduced energy demand, MillSAVOR Liquid Concentrate is the product of choice. In order ensure you have the right product and the correct application rate, Kemin Product Application Department (PAD) personnel will help you every step of the way from start to finish.
In a trial with a customer pelleting corn screenings, an application of 2 pounds of MillSAVOR Liquid per ton of screenings not only reduced power demand by 3% throughput increased by 7.5%. In a trial where the feed contained a high level of distiller grains, the PDI and the feed mill output increased with the application of MillSAVOR Liquid.
The ingredients in both products are non-corrosive to milling equipment.
Kemin has a Product Application Department (PAD) with expertise to apply all Kemin liquid products. Once you agree to use MillSAVOR Liquid or MillSAVOR Liquid Concentrate our PAD team takes over the process. They will visit your location and design a customized system specifically for your feed mill. After you agree to the system, our team will return for the installation and will remain to help your team understand operation of the new system. Then, after the sale, our team is available to perform periodic maintenance on equipment and to train new employees at your request.
If you have a question about or milling program or just want more information, fill out the form below and someone from our liquid team will contact you with more information.
If you have a question about our products or services, or just want more information, fill out the form below and someone on our team will be in contact with you.